source: trunk/Changelog @ 171

3.0.4:
  * Fixed an error with importing pxeconfig if it is not in the standard
    python path.
  Reported by : Ole Holm Nielsen
  Implemented by : Bas van der Vlies

3.0.3:
  * --version/-V  prints now the version info and exits

3.0.2:
  * If option remove is specified, then do not ask for configuration file,
    closses #9
    Reporter: Ramon Bastiaans (SARA)
    Author  : Bas van der Vlies

3.0.1:
  * Import AdvancedParser instead of sara location.
    Author: Maarten van Ingen (SARA)

3.0.0:
 * Added the AdvancedParser module created by Dennis Stam (SARA). This
    removed a lot of obsolete code and command line options. The new version
    is not compatible with the previous one.
    Author: Bas van der Vlies & Dennis Stam

  * New directory structure, added src directory.
    Author: Bas van der Vlies

  * Pxeconfig is now a python module and can be used inside python programs.
    Author: Bas van der Vlies

  * Added python setup method to support the new behaviour

2.0.0
 - Fixed a bug in -r/--remove option. Do not display
   pxe filemame menu.
   Author: Bas van der Vlies

 - pxeconfigd.xinetd in the example directory is created by 
   configure.
   Implemented by : Bas van der Vlies & Ole Holm Nielsen

 - Fixed some spell errors
   Author: Bas van der Vlies  & Ole Holm Nielsen

 - Add new optione -w/--equal-width, eg:
    * pxeconfig -w --basename gb-r40n -s 1 -e 2 --filename default.install

   Will create links to default.install for hosts:
        gb-r40n09
        gb-r40n10

   Suggested by : Ole Holm Nielsen
   Implemented by : Bas van der Vlies

 - Various bugs fixed with setting pxeconfig directory in pxeconfig.conf:
   - Setting of the pxeconfig directory in config file did not have any effect
   - Convert pxeconfig directory to realpath else os.chdir fails
   Author: Bas van der Vlies

 - Fixed a bug in short option '-b' (basename) must have an argument.
   Author: Bas van der Vlies

 - In analogue with systemimager we have a -H,--host-range <number>-<number>
   option. It must be used in combinatiion with -b,--basebane, eg:
     pxeconfig --basename gb-r1n --host-range 1-2 -filename default.memtestZ

   will produce links to file default.memtest for these hosts
      - gb-r1n1
      - gb-r1n2

  If leading zeros are used, then host names will be padded with zeros.
     pxeconfig --basename gb-r1n --host-range 01-02 -filename default.memtestZ

  will produce links to file default.memtest for these hosts
      - gb-r1n01
      - gb-r1n02

   Suggested by : Ole Holm Nielsen
   Implemented by : Bas van der Vlies

 - We do need the check for a C-compiler so remove it from the configure.in
   and made a new configure
   Author: Bas van der Vlies

 - Added -R,--rack and -N,--node option, eg:
     pxeconfig --basename gb- --rack r1-r2 --node n1-n2 -f default.memtest

     will produce links to file defaul.memtest for these hosts:
       - gb-r1n1
       - gb-r1n2
       - gb-r2n1
       - gb-r2n2

  If leading zeros are used, then rack and/or node names will be padded with
  zeros, eg:
     pxeconfig --basename gb- --rack r01-r02 --node n01-n02 -f default.memtest

     will produce links to file defaul.memtest for these hosts:
       - gb-r01n01
       - gb-r01n02
       - gb-r02n01
       - gb-r02n02

   Author: Bas van der Vlies

 - Added --dry-run mode 
   Author: Bas van der Vlies

1.0.0
 - List of pxeconfig files are now sorted alphabetically
 - Use GNU getopt. This means that option and non-option arguments may be 
   intermixed.
 
 - hexls now sorts its output
   Suggested by : Ole Holm Nielsen
   Implemented by : Bas van der Vlies

 - hexls now also display link info for hex files shorter dan 8 characters.
   Some hex files can point to a subnet IP adddress
   Suggested by : Ole Holm Nielsen
   Implemented by : Bas van der Vlies

 - Added -b/--basename option. This is for host with a common prefix, eg:
     pxeconfig --basename gb-r40n --start 1 --end 2 --filename default.install

   Will create links to default.install for hosts:
        gb-r40n1
        gb-r40n2

   Implemented by: Bas van der Vlies

 - Added pxe-menu tools:

 The PXE-menu tools are used to control the booting of networked computers
 directly from the computer's console at the BIOS level before any operating
 system has been loaded.  This is extremely useful for diagnostic purposes,
 or for selecting an operating system installation method, of an individual
 computer.  For further information please read the files README-pxemenu and
 INSTALL-pxemenu.

   Implemented by: Ole Holm Nielsen

0.7
 - Added default.memtest and default.flashqla as example how to 
   use pxeconfig utilities for other purposes then for systemimager.

 - Added configure script (autoconf tools). 

 - Replaced the debian build package system by a better one that
   uses the added configure script. It must now be easy to build
   also a rpm package.

 - Added a configuraton file pxeconfig.conf, eg to specify the
   location of pxe config directory. Closes ticket #3.

 - Removed the -d/--directory option for pxeconfig. It is replaced by
   the configuration file pxeconfig.conf (pxe_config_dir).

0.6.6
 - Fixed an error in postinst script for Debian. 

0.6.5
 - added reading symlinks to hexls; this produces output like
    C0A811DD => 192.168.17.221 => gb-r13n5.irc.sara.nl -> default.node_install

0.6.4:
 - Fixed a bug in hexls with non resolving hostnames
   Reported by:  Ole Holm Nielsen

0.6.3:
 - Added hostname lookup feature to hexls. If succes it will display the 
   HEX address, ip-number, hostname, eg:
    C0A811DD => 192.168.17.221 => gb-r13n5.irc.sara.nl

0.6.2:
  - Fixed a bug in the non-interactive mode reported by and fixed
    by: Charles Galpin from defenderhosting.com

0.6.1:
  - Interactive mode did not work anymore. Fixed it by adding 
    -i/--interactive command line options.
    Thanks to: Walter de Jong

0.6:
  - Added -r|--remove option. Now it is possible to remove the
    pxe boot file, eg:
        pxeconfig --remove dummy.sara.nl

    Works also for the other options.

0.5
  - Added support for hostnames on the command line instead of network
    numbers, eg:
        pxeconfig -f default.node_install bas.ka.sara.nl walter.ka.sara.nl

0.4.4
  - Updated documentation for xinetd support + example config
  - Added support for xinetd in the debian package scripts
    Implemented by: Ramon Bastiaans

0.4.3
  - Added make_deb_pkg.sh utility to make an DEBIAN package
  - changed port number to 6611 for pxeconfigd. Webmin is using the 10000
    port number.

0.4.2
  Minor change to pxeconfig/pxeconfigd utiltites. Added '-V/--version' 
  flag for printing version info.

  Updated the INSTALL instructions. Howto use it for systemimager 3.X
  versions

0.4
  Pxeconfig can now be used interactively or via command line
  options.

0.3
  Fixed a bug in hexls. The regular expression to determine if
  a filename is pxe hex filename or ordinary filename was wrong.

0.2.1
  Bugfix now we can run pxeconfig a second time to change the pxe boot file.
  Reported by: Ole Holm Nielsen

  Phrase change use 'Select a number:' instead of 'Choice a number'
  Proposed by: Ole Holm Nielsen