[200] | 1 | 4.0.3: |
---|
| 2 | * Removed server_args from pxeconfig.xinetd example. Everything is set via |
---|
| 3 | the pxeconfig.conf file. closes #15 |
---|
| 4 | Reported by: juriaan Saathof (SARA) |
---|
| 5 | Fixed by: Bas van der Vlies |
---|
| 6 | |
---|
[199] | 7 | 4.0.2: |
---|
[182] | 8 | * Improved error handeling for AdvanceParser.py |
---|
| 9 | Author: Dennis Stam |
---|
| 10 | |
---|
| 11 | * debian/postinst. Use /bin/echo instead of echo else |
---|
| 12 | wrong entry in /etc/services, closes #13 |
---|
| 13 | Author: Bodo MeiBner <bodo at bodo-m dot de> |
---|
| 14 | Applied by: Bas van der Vlies |
---|
| 15 | |
---|
[183] | 16 | * debian/control. Fixed dependecies problems for pxeconfig |
---|
| 17 | package. Added inetd | xinetd, closes #14 |
---|
| 18 | Author: Bodo MeiBner <bodo at bodo-m dot de> |
---|
| 19 | Applied by: Bas van der Vlies |
---|
| 20 | |
---|
[185] | 21 | * pxemenu has been updated. See: |
---|
| 22 | - INSTALL-pxemenu |
---|
| 23 | - README-pxemenu |
---|
| 24 | - Updates for SYSLINUX version 4.02. |
---|
| 25 | - Some obsolete menus (UBC,Ghost) have been removed. |
---|
[186] | 26 | Author: Ole Holm Nielsen |
---|
[185] | 27 | |
---|
[195] | 28 | * Added support for hosts that only can use mac address for |
---|
[186] | 29 | pxelinux configuration. This is used in environments |
---|
| 30 | where dynamic ip's are used. To enable this you must set in |
---|
| 31 | pxeconfig.conf: |
---|
| 32 | [DEFAULT] |
---|
| 33 | arp_command : /usr/sbin/arp -n |
---|
| 34 | |
---|
| 35 | |
---|
[195] | 36 | You can use host labels as shortcuts. Edit pxelinux.conf and add |
---|
[186] | 37 | for eg: |
---|
| 38 | [bas] |
---|
| 39 | mac_address: 00:19:b9:de:21:47 |
---|
| 40 | |
---|
| 41 | Now you can use: |
---|
[195] | 42 | 'pxeconfig bas' instead of 'pxeconfig 00:19:b9:de:21:47' |
---|
[186] | 43 | |
---|
[195] | 44 | You can mix hostnames and mac-addresses on the command line |
---|
[186] | 45 | |
---|
| 46 | Author: Bas van der Vlies |
---|
| 47 | |
---|
[197] | 48 | * Added post install script 98all.pxeconfig. It can be used in sali and systemimager |
---|
| 49 | Author: Ole Holm Nielsen |
---|
| 50 | |
---|
[177] | 51 | 3.1.2: |
---|
| 52 | * Added rpm spec file |
---|
| 53 | Author: Ramon Bastiaans ( bastiaans add sara dot nl ) |
---|
| 54 | |
---|
| 55 | * Fixed a bug in pxconfig when 'client_script_hook' is not set in |
---|
| 56 | pxeconfig file. |
---|
| 57 | Reporter: Ramon Bastiaans (bastiaans add sara dot nl) |
---|
| 58 | Fixed by: Bas van der Vlies |
---|
| 59 | |
---|
| 60 | * Removed some obselete code from pxeconfigd |
---|
| 61 | Fixed by: Bas van der Vlies |
---|
| 62 | |
---|
[172] | 63 | 3.1.0: |
---|
| 64 | * Added client/daemon hook script code. Two new options |
---|
| 65 | for the pxeconfig.conf file |
---|
| 66 | - daemon_script_hook |
---|
| 67 | - client_script_hook |
---|
| 68 | |
---|
| 69 | We use these scripts to open (client_script_hook) and close |
---|
| 70 | (daemon_script_hook) ports on the firewall. So not everybody can do |
---|
| 71 | an rsync or use a bittorrent client to get useful info. |
---|
| 72 | |
---|
| 73 | Authors: Bas van der Vlies and Walter de Jong (SARA) |
---|
| 74 | |
---|
| 75 | * new module pxe_global.py, used by pxeconfig and pxeconfigd |
---|
| 76 | |
---|
| 77 | * Rewrite of the daemon code. removed the option -d/--directory is replaced |
---|
| 78 | by configuration file option. |
---|
| 79 | |
---|
| 80 | |
---|
[162] | 81 | 3.0.4: |
---|
| 82 | * Fixed an error with importing pxeconfig if it is not in the standard |
---|
| 83 | python path. |
---|
| 84 | Reported by : Ole Holm Nielsen |
---|
| 85 | Implemented by : Bas van der Vlies |
---|
| 86 | |
---|
[158] | 87 | 3.0.3: |
---|
| 88 | * --version/-V prints now the version info and exits |
---|
| 89 | |
---|
[154] | 90 | 3.0.2: |
---|
| 91 | * If option remove is specified, then do not ask for configuration file, |
---|
| 92 | closses #9 |
---|
| 93 | Reporter: Ramon Bastiaans (SARA) |
---|
| 94 | Author : Bas van der Vlies |
---|
| 95 | |
---|
[151] | 96 | 3.0.1: |
---|
| 97 | * Import AdvancedParser instead of sara location. |
---|
| 98 | Author: Maarten van Ingen (SARA) |
---|
| 99 | |
---|
[133] | 100 | 3.0.0: |
---|
[146] | 101 | * Added the AdvancedParser module created by Dennis Stam (SARA). This |
---|
| 102 | removed a lot of obsolete code and command line options. The new version |
---|
| 103 | is not compatible with the previous one. |
---|
| 104 | Author: Bas van der Vlies & Dennis Stam |
---|
[133] | 105 | |
---|
[146] | 106 | * New directory structure, added src directory. |
---|
| 107 | Author: Bas van der Vlies |
---|
[145] | 108 | |
---|
[146] | 109 | * Pxeconfig is now a python module and can be used inside python programs. |
---|
| 110 | Author: Bas van der Vlies |
---|
[145] | 111 | |
---|
[146] | 112 | * Added python setup method to support the new behaviour |
---|
| 113 | |
---|
[120] | 114 | 2.0.0 |
---|
[114] | 115 | - Fixed a bug in -r/--remove option. Do not display |
---|
| 116 | pxe filemame menu. |
---|
| 117 | Author: Bas van der Vlies |
---|
| 118 | |
---|
[127] | 119 | - pxeconfigd.xinetd in the example directory is created by |
---|
| 120 | configure. |
---|
| 121 | Implemented by : Bas van der Vlies & Ole Holm Nielsen |
---|
| 122 | |
---|
[117] | 123 | - Fixed some spell errors |
---|
[129] | 124 | Author: Bas van der Vlies & Ole Holm Nielsen |
---|
[117] | 125 | |
---|
| 126 | - Add new optione -w/--equal-width, eg: |
---|
| 127 | * pxeconfig -w --basename gb-r40n -s 1 -e 2 --filename default.install |
---|
| 128 | |
---|
| 129 | Will create links to default.install for hosts: |
---|
| 130 | gb-r40n09 |
---|
| 131 | gb-r40n10 |
---|
| 132 | |
---|
| 133 | Suggested by : Ole Holm Nielsen |
---|
| 134 | Implemented by : Bas van der Vlies |
---|
| 135 | |
---|
[118] | 136 | - Various bugs fixed with setting pxeconfig directory in pxeconfig.conf: |
---|
| 137 | - Setting of the pxeconfig directory in config file did not have any effect |
---|
| 138 | - Convert pxeconfig directory to realpath else os.chdir fails |
---|
[117] | 139 | Author: Bas van der Vlies |
---|
| 140 | |
---|
| 141 | - Fixed a bug in short option '-b' (basename) must have an argument. |
---|
| 142 | Author: Bas van der Vlies |
---|
[119] | 143 | |
---|
| 144 | - In analogue with systemimager we have a -H,--host-range <number>-<number> |
---|
| 145 | option. It must be used in combinatiion with -b,--basebane, eg: |
---|
| 146 | pxeconfig --basename gb-r1n --host-range 1-2 -filename default.memtestZ |
---|
| 147 | |
---|
| 148 | will produce links to file default.memtest for these hosts |
---|
| 149 | - gb-r1n1 |
---|
| 150 | - gb-r1n2 |
---|
| 151 | |
---|
| 152 | If leading zeros are used, then host names will be padded with zeros. |
---|
| 153 | pxeconfig --basename gb-r1n --host-range 01-02 -filename default.memtestZ |
---|
| 154 | |
---|
| 155 | will produce links to file default.memtest for these hosts |
---|
| 156 | - gb-r1n01 |
---|
| 157 | - gb-r1n02 |
---|
| 158 | |
---|
[120] | 159 | Suggested by : Ole Holm Nielsen |
---|
| 160 | Implemented by : Bas van der Vlies |
---|
[117] | 161 | |
---|
[120] | 162 | - We do need the check for a C-compiler so remove it from the configure.in |
---|
| 163 | and made a new configure |
---|
| 164 | Author: Bas van der Vlies |
---|
| 165 | |
---|
[123] | 166 | - Added -R,--rack and -N,--node option, eg: |
---|
| 167 | pxeconfig --basename gb- --rack r1-r2 --node n1-n2 -f default.memtest |
---|
| 168 | |
---|
| 169 | will produce links to file defaul.memtest for these hosts: |
---|
| 170 | - gb-r1n1 |
---|
| 171 | - gb-r1n2 |
---|
| 172 | - gb-r2n1 |
---|
| 173 | - gb-r2n2 |
---|
| 174 | |
---|
| 175 | If leading zeros are used, then rack and/or node names will be padded with |
---|
| 176 | zeros, eg: |
---|
| 177 | pxeconfig --basename gb- --rack r01-r02 --node n01-n02 -f default.memtest |
---|
| 178 | |
---|
| 179 | will produce links to file defaul.memtest for these hosts: |
---|
| 180 | - gb-r01n01 |
---|
| 181 | - gb-r01n02 |
---|
| 182 | - gb-r02n01 |
---|
| 183 | - gb-r02n02 |
---|
| 184 | |
---|
| 185 | Author: Bas van der Vlies |
---|
| 186 | |
---|
[126] | 187 | - Added --dry-run mode |
---|
| 188 | Author: Bas van der Vlies |
---|
| 189 | |
---|
[109] | 190 | 1.0.0 |
---|
[98] | 191 | - List of pxeconfig files are now sorted alphabetically |
---|
[99] | 192 | - Use GNU getopt. This means that option and non-option arguments may be |
---|
| 193 | intermixed. |
---|
[101] | 194 | |
---|
| 195 | - hexls now sorts its output |
---|
| 196 | Suggested by : Ole Holm Nielsen |
---|
| 197 | Implemented by : Bas van der Vlies |
---|
[98] | 198 | |
---|
[101] | 199 | - hexls now also display link info for hex files shorter dan 8 characters. |
---|
| 200 | Some hex files can point to a subnet IP adddress |
---|
| 201 | Suggested by : Ole Holm Nielsen |
---|
| 202 | Implemented by : Bas van der Vlies |
---|
[99] | 203 | |
---|
[104] | 204 | - Added -b/--basename option. This is for host with a common prefix, eg: |
---|
| 205 | pxeconfig --basename gb-r40n --start 1 --end 2 --filename default.install |
---|
| 206 | |
---|
| 207 | Will create links to default.install for hosts: |
---|
| 208 | gb-r40n1 |
---|
| 209 | gb-r40n2 |
---|
| 210 | |
---|
| 211 | Implemented by: Bas van der Vlies |
---|
| 212 | |
---|
[109] | 213 | - Added pxe-menu tools: |
---|
| 214 | |
---|
| 215 | The PXE-menu tools are used to control the booting of networked computers |
---|
| 216 | directly from the computer's console at the BIOS level before any operating |
---|
| 217 | system has been loaded. This is extremely useful for diagnostic purposes, |
---|
| 218 | or for selecting an operating system installation method, of an individual |
---|
| 219 | computer. For further information please read the files README-pxemenu and |
---|
| 220 | INSTALL-pxemenu. |
---|
| 221 | |
---|
| 222 | Implemented by: Ole Holm Nielsen |
---|
| 223 | |
---|
[88] | 224 | 0.7 |
---|
[73] | 225 | - Added default.memtest and default.flashqla as example how to |
---|
| 226 | use pxeconfig utilities for other purposes then for systemimager. |
---|
| 227 | |
---|
[88] | 228 | - Added configure script (autoconf tools). |
---|
[84] | 229 | |
---|
[88] | 230 | - Replaced the debian build package system by a better one that |
---|
| 231 | uses the added configure script. It must now be easy to build |
---|
| 232 | also a rpm package. |
---|
[84] | 233 | |
---|
| 234 | - Added a configuraton file pxeconfig.conf, eg to specify the |
---|
[88] | 235 | location of pxe config directory. Closes ticket #3. |
---|
[84] | 236 | |
---|
| 237 | - Removed the -d/--directory option for pxeconfig. It is replaced by |
---|
[88] | 238 | the configuration file pxeconfig.conf (pxe_config_dir). |
---|
[84] | 239 | |
---|
[68] | 240 | 0.6.6 |
---|
| 241 | - Fixed an error in postinst script for Debian. |
---|
| 242 | |
---|
[65] | 243 | 0.6.5 |
---|
| 244 | - added reading symlinks to hexls; this produces output like |
---|
| 245 | C0A811DD => 192.168.17.221 => gb-r13n5.irc.sara.nl -> default.node_install |
---|
| 246 | |
---|
[63] | 247 | 0.6.4: |
---|
| 248 | - Fixed a bug in hexls with non resolving hostnames |
---|
| 249 | Reported by: Ole Holm Nielsen |
---|
| 250 | |
---|
[62] | 251 | 0.6.3: |
---|
| 252 | - Added hostname lookup feature to hexls. If succes it will display the |
---|
| 253 | HEX address, ip-number, hostname, eg: |
---|
| 254 | C0A811DD => 192.168.17.221 => gb-r13n5.irc.sara.nl |
---|
| 255 | |
---|
[60] | 256 | 0.6.2: |
---|
| 257 | - Fixed a bug in the non-interactive mode reported by and fixed |
---|
| 258 | by: Charles Galpin from defenderhosting.com |
---|
| 259 | |
---|
[56] | 260 | 0.6.1: |
---|
| 261 | - Interactive mode did not work anymore. Fixed it by adding |
---|
| 262 | -i/--interactive command line options. |
---|
| 263 | Thanks to: Walter de Jong |
---|
| 264 | |
---|
[54] | 265 | 0.6: |
---|
| 266 | - Added -r|--remove option. Now it is possible to remove the |
---|
| 267 | pxe boot file, eg: |
---|
| 268 | pxeconfig --remove dummy.sara.nl |
---|
| 269 | |
---|
| 270 | Works also for the other options. |
---|
| 271 | |
---|
[48] | 272 | 0.5 |
---|
| 273 | - Added support for hostnames on the command line instead of network |
---|
| 274 | numbers, eg: |
---|
| 275 | pxeconfig -f default.node_install bas.ka.sara.nl walter.ka.sara.nl |
---|
| 276 | |
---|
[44] | 277 | 0.4.4 |
---|
[45] | 278 | - Updated documentation for xinetd support + example config |
---|
[44] | 279 | - Added support for xinetd in the debian package scripts |
---|
[45] | 280 | Implemented by: Ramon Bastiaans |
---|
[44] | 281 | |
---|
[42] | 282 | 0.4.3 |
---|
| 283 | - Added make_deb_pkg.sh utility to make an DEBIAN package |
---|
| 284 | - changed port number to 6611 for pxeconfigd. Webmin is using the 10000 |
---|
| 285 | port number. |
---|
| 286 | |
---|
[31] | 287 | 0.4.2 |
---|
[28] | 288 | Minor change to pxeconfig/pxeconfigd utiltites. Added '-V/--version' |
---|
| 289 | flag for printing version info. |
---|
| 290 | |
---|
[31] | 291 | Updated the INSTALL instructions. Howto use it for systemimager 3.X |
---|
| 292 | versions |
---|
| 293 | |
---|
[21] | 294 | 0.4 |
---|
| 295 | Pxeconfig can now be used interactively or via command line |
---|
| 296 | options. |
---|
| 297 | |
---|
[17] | 298 | 0.3 |
---|
| 299 | Fixed a bug in hexls. The regular expression to determine if |
---|
| 300 | a filename is pxe hex filename or ordinary filename was wrong. |
---|
| 301 | |
---|
[15] | 302 | 0.2.1 |
---|
[17] | 303 | Bugfix now we can run pxeconfig a second time to change the pxe boot file. |
---|
| 304 | Reported by: Ole Holm Nielsen |
---|
[16] | 305 | |
---|
[17] | 306 | Phrase change use 'Select a number:' instead of 'Choice a number' |
---|
| 307 | Proposed by: Ole Holm Nielsen |
---|